Product Details:
Minimum Order Quantity | 1 Piece |
Production Capacity | 200 kg/hr |
Machine Type | Twin Screw Extruder |
Machine Power (kW) | 80 kW |
Frequency | 50Hz |
Brand | Abdul |
Automatic Grade | Automatic |
Voltage | 380 V |
Dear Sir
Offer OF VEN TED REPROCESSING PLANT MODEL S-100-175-200 Twin screw feeding
A. EXTRUDER:-
1. Frame :-Rigid frame made from channel & Sheet
2. Screw:-100MM Made of Alloy steel EN41 B ,Nitrided ,hardness 65RC ,Mirror
Polished,LD Ratio 32:1.
2a. Twin screw for feeding of material
2b. Barrel :- 100mm Made of Alloy Steel EN41B,Nitrided and hardness 65 RC,Grinding
and honning.
2c. Twin barrel for feeding of material with bearing block
3. Main Motor - 40 hp,1440 RPM AC (Crompton /Kirloskar) with ac drive
4. Gear Box :- Helical gear box 200
Cont, d page 2
5. Output:- 100-125kg/hr ( Depend on material)
6. Cooling Arrangement:- It is provided at the base of the hopper on the barrel of the extruder. Barrel all zone will be cooled by blower
7. Heater mica
8. Vcccum pump:- 3hp with fitting Klosker make
9. Hopper cramer with 5hp motor and gear box
9 B:-PANEL
Make of MS Sheet Switch gear (BCH OR L&T)
1. 9 NO Digital Temperature controller
2. 9NO Contactor make 16AMP
3. 9NO Amp. Meter 0-30amp
4. 1No Volt Meter 0-500V,and 1No Amp. Meter 0-100 A,
5. Phae Indicator and on /of f switch
10 . HYDRAULIC SCREEN CHANGER
1. Materail alloy steel
2. Hydraulic operated
3. 3hp power pack with standard make motor and hydraulic component
4. Screen dia 10”inch
11. Water Tank:= 19”*19”*7’ SS Sheet and frame angle
12 Air Blower with 3hp motor and starter
13 Stand cutter :- 8” with 5hp motor and starter
TOTAL PRICE Rs 13,00,000/-
Product Details:
Minimum Order Quantity | 1 Piece |
Type | Pipe Extruder |
Operation Mode | Automatic |
Output(kg/hr) | 200 Kg/hr |
Material | LDPE |
Dimension(L*W*H) | 5 X 2 X 5.5 m |
Dear Sir,
Offer OF VENTED REPROCESSING PLANT
MODEL S-100-175-200 FOR PP,ABS,HIP, CRYSTAL.
A. EXTRUDER:-
1. Frame :-Rigid frame made from channel & Sheet
2. Screw:-100MM Made of Alloy steel EN41 B ,Nitrided ,hardness 65RC ,Mirror
Polished,LD Ratio 32:1.
2a. Barrel :- 100mm Made of Alloy Steel EN41B,Nitrided and hardness 65 RC,Grinding
and honning.
3. Main Motor - 40 hp,1440 RPM AC (Cropton or Kirloskar)
3A. Starter:-
4. Gear Box :- Helical gear box 200
5. Output:- 175-200kg/hr ( Depend on material)
6. Cooling Arrangement:- It is provided at the base of the hopper on the barrel of the extruder. Barrel all zone will be cooled by blower
7. Heater mica
8. Vcccum pump:- 3hp with fitting Klosker make
9 B:-PANEL
Make of MS Sheet Switch gear (BCH OR L&T)
1. 10 NO Digital Temperature controller
2. 10NO Contactor make 16AMP
3. 10NO Amp. Meter 0-30amp
4. 1No Volt Meter 0-500V,and 1No Amp. Meter 0-100 A,
5. Phae Indicator and on /of f switch
10 . HYDRAULIC SCREEN CHANGER
1. Materail alloy steel
2. Hydraulic operated
3. 3hp power pack with standard make motor and hydraulic component
4. Screen dia 203MM
11. Water Tank:= 19”*19”*6’ SS Sheet and frame angle
12 Stand cutter :- 6” with 3hp motor and starter
TOTAL PRICE Rs 10,90,000/-
Terms & Condition
1. Price :- Ex works Delhi.
2. Taxes:- Extra.
3. Payment :- 50 % Advance and balance payment and taxes with “C” form againt delivery at our works.
4. Delivery :- 7-8 Weeks.
5 .Order will not be cancelled any condition.
6. Warranty-
All parts/Material / machine/ manufactured are guaranteed against defects in material and workmanship under normal use and service conditions. Should any part made by us prove defective with one year the same shall be repaired or replaced by us at no additional cost.